Expert Service for Your Hotpoint Home Appliances

Hotpoint is a trusted fixture in modern households, celebrated for its practical design and long-lasting reliability. But even the most hardworking appliances require professional attention to stay in peak condition.

Our certified technicians are experts in the entire Hotpoint inventory. We go beyond quick fixes – we restore your Hotpoint appliance to its original factory-grade performance by using exclusively genuine OEM Hotpoint parts.

Hotpoint Appliances We Repair

We service all major Hotpoint models with $0 service fee with repair.

Hotpoint Washer Repair

Is your washer failing to spin or leaking on the laundry room floor? We handle everything from agitator issues to electronic control board failures, ensuring your Hotpoint washer handles your toughest loads with ease again.

Hotpoint Dryer Repair

A dryer that won’t heat is a major inconvenience. Our technicians quickly diagnose thermal fuses, heating elements, and drum seals to restore that signature Hotpoint “just-out-of-the-dryer” freshness.

Common Hotpoint Washer & Dryer Issues

F05 (Waste pipe blockage): Check the pump filter (usually behind a small flap at the bottom) for coins or lint. Check the drain hose for kinks.
F06 (Door lock fault): Ensure no clothes are trapped. Give the door a firm push. If it won’t unlock, unplug for 2 minutes to let the heat-sensitive lock release.
F01 (Electronic board fault): Perform a “Hard Reset”: Unplug for 5 minutes. If it returns, the main PCB likely needs repair.
F08 (Heater relay fault): Often means the heating element has failed. Unplug the unit and call for service to avoid electrical shorts.
F13/F15 (Dryer sensing/heater): Clean the condenser and check that the drying fan is spinning.

Hotpoint Dishwasher Repair

If your dishes are coming out cloudy or the cycle won’t start, we can help. We specialize in Hotpoint filtration systems, spray arms, and water inlet valves to ensure your cleanup is as simple as it should be.

Common Hotpoint Dishwasher Issues

F01 (Anti-flood): The base tray has detected water. Action: Unplug immediately. Tilt the unit slightly to see if water leaks out. If so, you have an internal leak.
F03 (Drain failure): The machine timed out while trying to empty. Action: Check the sink connection and the internal filters. Ensure the drain hose isn’t squashed.
F06 (Water fill timeout): No water is entering. Action: Check that your water tap is fully open and the inlet hose filter isn’t clogged with grit.
F12 (Communication error): The display and main board aren’t talking. Action: Reset the power at the breaker for 10 minutes.

Hotpoint Fridge Repair

From top-freezer models to compact designs, we keep your groceries fresh. We provide expert repair for Hotpoint compressors, defrost timers, and ice makers to prevent food spoilage and keep things cool.

Common Hotpoint Refrigerator Issues

E1 / E2: Fridge or Freezer sensor fault. Your food might start to freeze or thaw. Action: Check if the door was left open. If not, a sensor likely needs replacing.
E9: High temperature alarm. Action: Ensure the door seals are clean and the “Fast Freeze” isn’t accidentally on. Check that the back coils have enough airflow.
EE: Ice maker fault. Action: Check for jammed ice cubes in the mechanism and ensure the water line isn’t frozen.

Hotpoint Stove & Cooktop Repair

Whether you have a gas or electric Hotpoint cooktop, safety and precision are our priorities. We repair faulty igniters, heating coils, and surface elements so you can get back to stress-free cooking.

Hotpoint Oven Repair

Uneven baking or a door that won’t latch can ruin a meal. We calibrate temperatures and replace faulty heating elements or sensors, restoring your Hotpoint oven to its factory-set accuracy.

Common Hotpoint Cooktop, Stove & Oven Issues

F0 / F1 / F7: Stuck touch pad. Action: Clean the glass surface thoroughly with a degreaser. If the buttons are physical, try “massaging” them to ensure they aren’t stuck down.
F2: Overheating sensed. Action: Usually happens during a “Self-Clean” cycle. Turn the oven off and let it cool for 1 hour. Check if the cooling fan is running.
F3 / F4: Oven temperature sensor (RTD) open or shorted. Action: The oven won’t know how hot it is and will refuse to cook. This part usually requires a simple plug-and-play replacement.
Gas Hob won’t light: Action: Ensure the burner caps are aligned perfectly and dry. If they are wet from cleaning, they won’t spark.

The “Hotpoint Reset” Rule

Before calling an engineer, always try the 20-minute rule:

Turn the appliance to the Off position.
Unplug it from the wall (don’t just turn it off at the socket).
Wait 20 minutes for the control board to fully discharge.
Plug it back in and try a simple cycle (like a Rinse or a low-heat Bake).

The OEM Advantage: For every service listed above, we use only genuine Hotpoint components to protect your warranty and ensure a perfect fit.

Proudly Serving Communities Across the USA

Choose your state to see all cities

texas
washington
indiana
kentucky
pennsylvania
district of columbia
virginia

See Why Homeowners Recommend Our Hotpoint Appliance Service

4.8

1949 reviews

4.8

238 reviews

Came and diagnosed the problem with my washing machine a few hours after I called them. Ordered the part needed and completed the repair promptly when it came in. Very fast and professional.

Fridge was making this loud buzzing noise audible from the next room. Tech came, tracked it down to a loose drain pan under the unit, secured it, and also cleaned the condenser coils while he was there. Totally quiet now

My Samsung dryer was shutting off after about ten minutes every cycle. Tech found the moisture sensor was coated and not reading correctly. Cleaned it, ran it through a cycle, works fine now. Simple fix but I never would have found it on my own

had been putting off calling about the fridge for a while because i assumed it would be a whole thing. it wasn’t. next day appointment, tech showed up on time, sorted it out quickly. honestly wish i’d called sooner

Dryer was heating intermittently — sometimes fine, sometimes nothing. Tech diagnosed it as a worn cycling thermostat. Replaced it same visit. Has worked consistently since

Ethan came to my home and repaired our washing machine quickly and professionally. Thank you, Ethan.

Ethan had the needed part in his truck and the job was very quick and successful! Thank you!

We needed the refrigerator repaired urgently and Ethan did a fantastic job. Great and prompt service. Highly recommend.

washer lid lock was broken so the machine wouldn’t start at all. tech came out next day, swapped the lid lock assembly, running in 20 minutes. fair price for a quick fix

I had a great experience with Ethan. He arrived the same day I called for service and was able to diagnose and fix my dryer in under 30 minutes. He was professional, polite, and very efficient throughout the entire process. I truly appreciate the prompt service and quality work. I would definitely recommend him to anyone in need of appliance repair.

Quick troubleshooting. Very knowledgeable service engineer.

Superior appliance worked fast and was able to fix my fridge same day. Ethan was helpful in explaining the issue and was able to resolve quickly!

Frequently Asked Questions: Hotpoint Repair

Is there a fee for the service call?

We offer a $0 service fee with any completed repair. If you choose to proceed with the fix, the diagnostic fee is completely waived.

Do you use genuine Hotpoint parts?

Yes. To maintain the integrity of your appliance and protect your manufacturer’s warranty, we use exclusively genuine OEM (Original Equipment Manufacturer) Hotpoint parts. These components are designed specifically for your model, ensuring a perfect fit and long-term durability.

Do you provide a warranty on your work?

Yes. All our Hotpoint repairs come with a comprehensive 90-day warranty on both parts and labor. We stand behind our quality so you can have peace of mind.

Is it worth repairing my Hotpoint appliance or should I replace it?

Hotpoint appliances are known for their longevity. If the cost of the repair is significantly less than a new unit and the overall “health” of the machine is good, repairing is almost always the more cost-effective and eco-friendly choice. Our technicians will always provide an honest assessment before starting any work.